Registered: 5 months ago
Introduction to Panic Alarms
The purpose of a panic alarm is to allow an individual under duress to quickly and silently call for help in the event of an emergency. Panic alarms are additionally called "duress alarms", "hold-up alarms", or "panic buttons".
Panic alarms are used when it could also be unsafe or uncomfortable to call for assist in other ways. For example, if a belligerent person is standing in your lobby, it may be unwise to further escalate the situation by picking up a phone to call for assistance. A panic alarm can provide a quick and handy way to summon assist without drawing attention.
Silva Consultants feels that nearly each enterprise can benefit from the use of panic alarms. Places where panic alarms could also be particularly beneficial include:
Receptionist's desks in building lobbies.
Security stations and checkpoints.
Customer service counters.
Check-out counters and cashier's stations.
Rooms where money or other valuables are received, processed, or stored.
Interview rooms in Human Resources department.
Executive office suites.
Locations the place confrontations with the public are likely to occur.
Parts of a Panic Alarm System
Panic alarms include two basic parts:
The panic button is the device that the individual prompts when he or she needs help. There are numerous styles of panic buttons available. These can have a single pushbutton, pushbuttons that should be pressed simultaneously, devices that have to be squeezed, and gadgets which might be activated by a foot or knee. There are also gadgets that may be covertly activated when money or a product is removed on the request of a robber. Most panic buttons are specifically designed to resist unintentional activation.
Panic buttons are normally installed in a location where they can easily be reached, but out of view of the informal observer. In lots of cases, panic buttons are put in on the underside of a desk or counter-top.
Panic buttons might be the wired type or wireless type. Wired panic buttons are related using cabling. Wired panic buttons are very reliable, but it can generally be difficult and expensive to get cable to every panic button location.
Wireless panic buttons use a brief-range radio transmitter, much like that used with a garage door opener. Wireless panic buttons are straightforward to put in and may be placed just about anywhere. Wireless panic buttons can also be carried around on the premises by employees if desired. Wireless panic buttons require batteries and have to be tested regularly to guarantee that they are operating properly.
The communications system is the tactic that is used to summon help when a panic button is pressed. The type of communications system used relies upon largely on the resources available on the facility where the panic alarm is being put in and the level of security threat.
Types of communications systems used can embrace:
Communications to an off-site alarm monitoring middle:
This method would typically be used at facilities that do not have an on-site security workers, similar to at a small business. The panic buttons could be related to an alarm control panel which sends a signal to the monitoring heart when a panic button is pressed. The alarm monitoring heart would then call the police or other appropriate individuals to reply to the site.
Communications to security management middle:
Most large corporations have some type of centralized security monitoring and management heart, either on-site, or at a central location somewhere within their organization. When this type of resource exists, panic buttons are typically monitored at the control center. Most often, panic buttons are related to the group's access management and security administration system, which transmits the alarm to the control center.
When a panic button is pressed, it sounds an alarm in the security control center. The center would then dispatch local security officers and/or the police to respond to the site.
Communications to non-security personnel:
Some organizations that should not have on-site security select to inform non-security personnel when a panic button is pressed. Often, the organization will type a "response team" consisting of workers from a number of departments (Facilities, HR, etc.) and ask that these employees reply when a panic button is pressed.
There are numerous systems that can be used to inform the response workforce when a panic button has been pressed. These include can include overhead paging systems and gadgets that ship voice messages, text messages, or electronic mail messages directly to smartphones.
In case you loved this article and you would love to receive more details about introduction to online buzzer kindly visit our web site.
Topics Started: 0
Replies Created: 0
Forum Role: Participant